Customers Problem: The customer had a part in service that contained a strainer to prevent particles entering down stream equipment. The strainer had failed, but was screwed into a plate from the inside. To replace it would mean turning off the equipment for several days to strip down and re-build. They approached HDL for an…
Customers Problem: A customer had a problem with catalytic beads within a double skinned, water-cooled reactant column. Everything worked well at low flow rates, but as end-users demanded ever higher flow rates, the catalytic beads were breaking apart, being carried downstream and interfering with equipment. HDL’s Solution: After examination of the reactant tube, HDL determined…
Customers Problem: A customer approached HDL because they had a gas manifold that draws gas from one back of cylinders and they wanted it to automatically swap to the second bank once the first bank was depleted. Once the first bank was re-filled, it would automatically swap back once the second was depleted. This problem…
Customers Problem: A customer approached HDL as they had recently sold vacuum pumps to the middle east, but the lead times on the 400V 60Hz pumps were too long. They requested that HDL convert the European specification pump to work in the Middle East. HDL’s Solution: HDL purchased a 400V 60Hz motor, However, the motor…